Expansion folders, also called “Juris folders”, are made from a single sheet, with multiple grooves on the flaps. Customer imprints possible. The folders can be delivered with loose or pre-stuck base reinforcements. This prevents the originals being archived against external damages that can get caused due to bending. This minimal enhancement increases the value-for-money aspect to a great degree. A large range of standard sizes available ex-stock.
Prices: We offer subject to confirmation (subject to revision without notice) exclusive VAT (net value). VAT is chargeable to EU-customers, unless your VAT ID number is supplied to us. VAT is legally required on the total cost of goods and carriage. Exports outside the European Union are not subject to VAT excluding other indirect taxes and custom charges.
Payment terms: As agreed upon and specified in an offer, preferably by bank transfer in Euros with all bank charges paid.
Packaging and delivery: Packaging cost is free of charge for net order value of >= 750 Euros, excluding packaging for bulky and oversize goods. Delivery costs are calculated based on your enquiry.
Delivery instructions: Please inspect your package immediately upon delivery. In case of any visible damage, please make a note on the freight document and have it confirmed by the haulage driver before signing the receipt document. This allows us to claim compensation for damages from our transport insurance. If the ordered goods are delivered by a shipping company, the consignee is responsible for unloading the goods (parcels/pallets) from the truck. If you have no equipment to unload pallets or to transport them to the house, please inform us before placing the order – we will surely find a solution for you!
Place of performance and jurisdiction is Immenstadt in Allgaeu/Germany. Otherwise we refer to our “General business terms and conditions“.
Prices: We offer subject to confirmation (subject to revision without notice) exclusive VAT (net value). VAT is chargeable to EU-customers, unless your VAT ID number is supplied to us. VAT is legally required on the total cost of goods and carriage. Exports outside the European Union are not subject to VAT excluding other indirect taxes and custom charges.
Payment terms: As agreed upon and specified in an offer, preferably by bank transfer in Euros with all bank charges paid.
Packaging and delivery: Packaging cost is free of charge for net order value of >= 750 Euros, excluding packaging for bulky and oversize goods. Delivery costs are calculated based on your enquiry.
Delivery instructions: Please inspect your package immediately upon delivery. In case of any visible damage, please make a note on the freight document and have it confirmed by the haulage driver before signing the receipt document. This allows us to claim compensation for damages from our transport insurance. If the ordered goods are delivered by a shipping company, the consignee is responsible for unloading the goods (parcels/pallets) from the truck. If you have no equipment to unload pallets or to transport them to the house, please inform us before placing the order – we will surely find a solution for you!
Place of performance and jurisdiction is Immenstadt in Allgaeu/Germany. Otherwise we refer to our “General business terms and conditions“.
The following production tolerances are to be taken into consideration:
Quantity tolerance for paper ± 3% however a minimum of ± 5 sheets per sales unit
Quantity tolerance for board, corrugated board ± 3%
Quantity tolerance for enclosures, folders, boxes ± 8%
Weight (grammage) tolerance ± 7%
Thickness (calliper) tolerance Paper and board up to 300 gsm ± 10% Board > 300 gsm ± 5% Corrugated board ± 8%
Dimensional (size) tolerance for paper and board material Sizes with plus tolerance max. ± 7 mm Cutting tolerance 4-sided angular cut ± 2 mm
Dimensional (size) tolerance for corrugated board Cutting tolerance ± 3 mm
Dimensional tolerance for reeled paper Roll width ± 5 mm, running metres ± 3%
Dimensional (size) tolerance for enclosures, folders, boxes Plus tolerance up to 5%
Dimensional (size) tolerance for envelope enclosures Angle tolerance ± 2 mm, size tolerance ± 3 mm
Dimensional (size) tolerance for tubes Diameter and tube wall thickness ± 0.3 mm, lengths ± 10 mm
Perpendicularity tolerance in the case of cuttingswith 4-sided angular cut Angle tolerance 0,6% however a minimum of 3 mm for 1 m length
Planarity tolerance for corrugated board Planarity (flatness) tolerance ± 15 mm for 1 m length
Spots (fibre residues and pulp impurities) Spots with a diameter of less than 0.4 mm are considered insignificant. Mounting board standard specifications stipulate that maximum two spots up to 0.9 mm in diameter each are acceptable per m²
pH tolerance ± 0.5 variation on the pH scale (pH 7.0, pH 6.5 and 7.5 are also permitted)
Deviating tolerances are to be agreed upon separately.
Tolerances
The following production tolerances are to be taken into consideration:
Quantity tolerance for paper ± 3% however a minimum of ± 5 sheets per sales unit
Quantity tolerance for board, corrugated board ± 3%
Quantity tolerance for enclosures, folders, boxes ± 8%
Weight (grammage) tolerance ± 7%
Thickness (calliper) tolerance Paper and board up to 300 gsm ± 10% Board > 300 gsm ± 5% Corrugated board ± 8%
Dimensional (size) tolerance for paper and board material Sizes with plus tolerance max. ± 7 mm Cutting tolerance 4-sided angular cut ± 2 mm
Dimensional (size) tolerance for corrugated board Cutting tolerance ± 3 mm
Dimensional tolerance for reeled paper Roll width ± 5 mm, running metres ± 3%
Dimensional (size) tolerance for enclosures, folders, boxes Plus tolerance up to 5%
Dimensional (size) tolerance for envelope enclosures Angle tolerance ± 2 mm, size tolerance ± 3 mm
Dimensional (size) tolerance for tubes Diameter and tube wall thickness ± 0.3 mm, lengths ± 10 mm
Perpendicularity tolerance in the case of cuttingswith 4-sided angular cut Angle tolerance 0,6% however a minimum of 3 mm for 1 m length
Planarity tolerance for corrugated board Planarity (flatness) tolerance ± 15 mm for 1 m length
Spots (fibre residues and pulp impurities) Spots with a diameter of less than 0.4 mm are considered insignificant. Mounting board standard specifications stipulate that maximum two spots up to 0.9 mm in diameter each are acceptable per m²
pH tolerance ± 0.5 variation on the pH scale (pH 7.0, pH 6.5 and 7.5 are also permitted)
Deviating tolerances are to be agreed upon separately.
This website uses cookies to optimise your online experience. Some of them are essential, while others help us to continuously improve our website. You can decide which categories you consent to. For a full range of functions, select »Accept all«.
Essential (1) Essential cookies enable fundamental functions and are required for proper functioning of the website.
Statistics (1) Statistical cookies collect information anonymously. This information helps us to understand how our visitors use our website. Name: Google Analytics Provider: Google LLC Purpose: Cookie from Google for website analyses. Generates statistical data about how visitors use the website.
